Elite Service Plans

Fall/Winter: Check & adjust all safety controls – Check all electrical components – Clean all safety controls – Vacuum clean burners and controls – Clean and adjust pilot assembly – Adjust burner for efficiency – Check for gas leaks in furnace – Lubricate all moving parts – Check belts and adjust tension – Check filters and replace if on site (Homeowner provided) – Check Flue pipe – Check Amperage on heat strips – Adjust pressure regulator – Check crankcase heater – Check and adjust thermostat – Check total performance & operating of heating system – Review with customer and report findings.

Spring/Summer: Check Install gauges & check operating pressure – Check voltage and amperage to all motors – Check air temperature drop across evaporator – Check for adequate refrigerant charge & possible leaks – Check evaporator superheat – Lubricate all moving parts – Check belts and adjust tension – Check filters and replace if on site (Homeowner provided) – Check pressure switch cut out setting/defrost control – Check electrical lock out circuits – Check starting contacts – Check wiring and connections – Check and adjust thermostat – Check air temperature across condenser – Check and clear condensate drain